Before applying glue, ensure that all surfaces are of sound nature and clean, dry and free from dust, grease or any other contamination.
Rinse your fingers immediately with plenty of warm soapy water and do not pull on the skin that has been glued. If glue remains after using warm soapy water, it will often de-bond within a couple of days due to general wear and tear and the natural oils in the skin. If skin irritation occurs, consult a doctor.
We recommend storing in a refrigerator to lengthen the shelf life. Refrigerated packaging should be allowed to return to room temperature prior to use.
Wipe the affected area with an acetone dampened cloth or nail polish remover containing acetone.
As a contact adhesive for installation of wall and floor panels
Most bonding applications where high strength, gap filling, one component adhesive is required
Timber, metal, cementitious and plaster sheets to timber or metal studs
Installation of battens or other fixings to brick, masonry or concrete walls
General-purpose construction adhesive
Suitable to use on foamed polystyrene
Ideal for mirror backed tiles
5-10 minutes depending on the temperature
20-30 minutes depending on the temperature
12-72 hours depending on the temperature and thickness
If working in an area with poor ventilation or in a confined area, we recommend a mask be worn.
Avoid contact with skin, eyes and avoid breathing in vapour.
If swallowed contact doctor. If skin contact occurs, wipe off excess and remove contaminated clothing. Wash affected area thoroughly with soap and water.
Blu Tack® is also available in a 5 colour pack - pink, green, blue, yellow & orange. It is also available in its original color of blue.
0.5 grams of Blu Tack® will hold an approximate 105 gram load, but Blu Tack® is not designed to hold heavy objects.
Blu Tack® is a non-toxic, non-harmful substance and will not cause any problems if swallowed, only mild discomfort. If any discomfort experienced continues, we recommend seeking medical advice.
Blu Tack® is great for both children and adults, however we advise not giving it to children under the age of three.
Blu Tack® can be used on non-porous surfaces such as glass, metal and plastic, as well as painted surfaces and vinyl coated wallpaper.
Surfaces must be clean and dry, and free from grease or loose materials to work best. If a room or surface conditions are too hot (over 70°C), Blu Tack® will soften and become more difficult to secure items in place.
Pop it in a tightly closed container in a dry, cool and well-ventilated location.
On some surfaces, after a long period of time, Blu Tack® can leave a slight oily mark. This can be removed using removers like citrus oils and desolvers, but as per the guidance of the suppliers. Before using these products, we recommend you test on a small inconspicuous area.
El Kapitan is used for the for bonding and finishing of:
Marine plywood
Wooden boat
Woodcraft
Construction
Ceramics
Furmiture
1 part A, 1 part B
1 to 1 1/2 hours
3 hours
36-72 hours
1 hour
El Heneral is used for the for the following:
Bonding old to new concrete
Dowelling of metal to concrete
Bonding joints between various material like concrete, metal, wood, glass, ceramics and porcelain
Other structural applications where parts are subject to heavy load
3 hours
The full curing time of El Heneral is 3 days.
El Supremo is used for the for the following:
Bonding old to new concrete
Dowelling of metal to concrete
Bonding joints between various material like concrete, metal, wood, glass, ceramics and porcelain
Other structural applications where parts are subject to heavy load
Rugby Excel is used for bonding of rubber, leather, leatherette, rubber foam, metal, canvas, and plywood to similar or dissimilar materials.
Clean bonding surfaces thoroughly. Remove any trace of water, oil, grease, dust and other impurities.
Apply even coats of Rugby Excel on both surfaces. For porous materials like wood, fabric, canvas, leather, foam, concrete, etc., apply second coat over the first coat.
Allow surface to dry for 20–30 minutes. Avoid excessive drying.
Join the materials together, ensuring parts are properly aligned before pressing. Press parts by applying a uniform pressure by hand or mechanical pressure such as rollers or hammer.
Excess adhesives may be removed with suitable solvent cleaner immediately before the glue dries.
Rugby Excel has a shelf life of 12 months.
Keep containers tightly closed after use. Keep away from electrical and other ignition sources.
Rugby Original is used for bonding of rubber, leather, leatherette, rubber foam, metal, canvas, and plywood to similar or dissimilar materials.
Clean bonding surfaces thoroughly. Remove any trace of water, oil, grease, dust and other impurities.
Apply even coats of Rugby Contact Cement on both surfaces. Application thickness may vary according to the porosity of substrates. Allow surface to dry for 20–30 minutes. Avoid excessive drying.
Join the materials together, ensuring parts are properly aligned before pressing. Press parts by applying a uniform pressure by hand or mechanical pressure such as rollers or hammer.
Excess adhesives may be removed with suitable solvent cleaner immediately before the glue dries.
Rugby Excel has a shelf life of 12 months.
Keep containers tightly closed after use. Keep away from electrical and other ignition sources.
Rugby Contact Cement contains flammable solvent mixtures. Before application, eliminate all possible sources of flames or sparks. Use only in areas with adequate ventilation to avoid excessive inhalation of vapors.
Bostik Glu Dots Removable are ideal for arts & craft, scrapbooking, card marking, collages and model making. Bostik Glu Dots Removable are the perfect size to allow for precise and accurate placing of small objects such as sequins, beads, rhinestones, wiggly eyes and many other craft embellishments. Bostik Glu Dots Removable stick to almost anything, including paper, wood, plastic, metal and glass.
Ensure surfaces are clean; dry free from grease and loose materials.
For best results, surfaces and surroundings should be pleasantly warm.
Take out a sheet of dots from the wallet.
Fold and then tear off, along the perforations, to remove as many dots as required.
Peel off the printed release paper to reveal a Glu Dot left on the clear backing. The Glu Dot is now ready for use.
Press the Glu Dot firmly onto the item to be bonded and then slowly and carefully peel off the clear backing.
The Glu Dot will be adhered to the item, which can now be bonded to the other surface.
Carefully and very slowly peel away. As the adhesive gets stronger with time, it is recommended that the dots are removed by carefully rubbing and rolling them off the surface.
24 months, unopened, from date of manufacture. Store in dry conditions between +5⁰ C and +25⁰ C
