HANDY HOT MELT GLUE GUN
Our best hot glue gun for crafts and minor household repairs
Bostik Handy Hot Melt Glue Gun is a compact, easy-to-use hot glue gun that’s ideal for arts and craft projects and light household repairs.
This handy Bostik glue gun operates at high temperatures from a mains electricity supply to achieve a strong, permanent bond to most materials including paper, ceramics, wood, plastic, metal, glass, leather, fabric and more.
The Handy Hot Melt Glue Gun incorporates a safety warning light to indicate when the gun is switched on and its trigger control allows for consistent application. Plus, it comes with its own retractable stand, which holds the gun in an upright position when not in use.
- Compact, easy-to-use glue gun for crafts, hobbies and minor household repairs
- Bonds most materials including paper, ceramics, wood, plastic, metal, glass, leather, fabric and more
- Ultra strong and fast-setting
- Easy trigger action, constant thermostatic control, safety warning light and retractable stand
- Operates between +175°C to +200°C
- Includes 2 Handy Hot Melt Glue Sticks
Handy Hot Melt Glue Sticks (pack of 14) also available.
Clear
-
Strong bond -
Easy-to-apply -
Dries clear -
Fast-setting
Documents or Resources
Technical Data Sheet
Safety Data Sheet
The file is stored on an external website, please follow the link
DOWNLOADHOW TO USE
PREPARATION
Fit the metal stand onto the front of the hot melt glue gun in the slots by the nozzle. Load a Bostik Handy Hot Melt Glue Stick through the grip ring at the rear of the gun and press the trigger several times until the stick is positioned firmly in the gun.
Plug in the gun and a light will come on at the rear to indicate that it is in operation. Then, rest the gun on its stand and allow to warm up for approximately 5 minutes. Ensure surfaces to be bonded are clean and dry.
APPLICATION
Press the trigger until adhesive flows from the nozzle. To ensure a continuous flow of glue, insert further glue sticks into the rear of the gun and wait a few minutes until the stick has heated to the correct temperature. DO NOT FORCE THE TRIGGER.
Apply adhesive to one surface. Press surfaces together within 15 seconds. Use of a clamp or other holding device is not necessary.
Unplug the hot melt gun when finished and allow to cool before storing. Surplus glue stick may be trimmed off using a sharp knife. Do not pull glue sticks from the back of the gun as damage may occur.
WATCH VIDEO
HOW TO REMOVE GLUE FROM A GLUE GUN
The adhesive can only be removed mechanically once cured by scraping carefully with a blade edge.
A residual thin film will remain, which can then be removed using a solvent cleaner.
Sensitive surfaces may be damaged by the hot adhesive or by the solvents used in the cleaning process. Always carry out a test before attempting removal.
FREQUENTLY ASKED QUESTIONS
Bostik Handy Hot Melt Glue Gun operates between +175°C to +200°C.
Bostik DIY Hot Melt Glue Gun operates between +175°C to +200°C.
Bostik Craft Cool Melt Glue Gun operates between +125°C to +135°C.
A glue gun’s lifespan can vary depending on its use. Sometimes, a glue gun can stop working due to a glue stick being jammed or stuck in the gun, causing a blockage in the nozzle. Ensure you are always using the right glue sticks for your glue gun to avoid this problem.
The fumes that glue guns can release are very rarely toxic but can sometimes be irritating for those who suffer from respiratory problems. Take care when using the glue guns as like most organic fumes, there is a possibility they could ignite depending on the environment they are used in.
Yes - adhesive from a glue gun is waterproof. It is extremely water resistant and can deal with varying temperatures, other solvents and even eroding, making it a long-lasting, ultra strong adhesive.
No - using the wrong glue sticks could block and damage your Bostik glue gun. We have three variations of glue gun, Handy Hot Melt Glue Gun, DIY Hot Melt Glue Gun and Craft Cool Melt Glue Gun and each of our glue guns have specific glue sticks that are available.
Bostik glue gun sticks are sold as individual packs of 14 Hot Melt Glue Sticks or 26 Cool Melt Glue Sticks.
If you haven't used all of the glue stick that you inserted into the glue gun, do not try to remove it. Removing the glue stick could damage the internal components of the gun - regardless if the adhesive is runny or hard.
Simply leave the glue stick in the glue gun until you use it again. Surplus glue stick may be trimmed off using a sharp knife.
When the glue stick is almost gone, you can insert another stick and continue to use the glue gun as normal.
The Bostik Handy Hot Melt Glue Gun and DIY Hot Melt Glue Gun operates at a high temperature and is great for providing an ultra strong, long-lasting bond for challenging materials such as polypropylene, plastics, ABS, acrylics and even metals.
The Bostik Craft Cool Melt Glue Gun operates at a lower temperature and is commonly used for bonding heat-sensitive materials such as styro-foam, ribbon and polystyrene, which a hot glue gun could melt. Plus, with being cooler, they can be safer to use, which is great for younger crafters or in school environments.
How to use a glue gun for the first time
A complete step-by-step guide to discover what is a glue gun, the difference between a hot glue gun vs a cool melt glue gun and how to use a glue gun.
6 simple hot glue gun crafts to do at home
Discover six simple hot glue gun uses! We take you through easy craft ideas to do with a glue gun at home from creating something new to repairing something old
